|
|
|
Weighing Applications & Automations / Peripherals
BlackDog Universal Set Point Unit for Weighing Indicator
Integrated unit easily mounted on a weighing indicator in order to produce set point signals. The system includes a power output circuit with relays.
Designed on a PLD's, the unit is flexible and covers any reasonable mounting requirement. The control signals are isolated (using opt couplers) for maximum safety and protection of the electronic weighing device.
 
| Specifications: |
| Digital Input Section |
| Logic Unit | ATF22V10BQL FLASH TM* PLD |
| Input HC | 8 Difference Programming Functions |
| Input Voltage Range | 5 ~ 28 Volt DC |
| Excitation voltage | 12VDC, ±5% 250 mA |
| Isolation Voltage | 5000 Vrms |
| Relay Output Section
| | Relay HC | 5 HC |
| Contact | Com, N.O. / N.C. |
Contact Rating
(LVD 73/23/EEC, 93/68/EEC) | 230V~ 3 Amp.
(70V 3 Amp.) 1,25A peak. |
| Max. Power Output | 250 VAC / 5 Amp, 30 VDC / 5 Amp, 1/8 HP / 250 VAC |
| Isolation Voltage | 1000 Vrms |
| Resistance | 100 mOhm @ 1A |
| Life | 200 x 103 ops min |
| General
| | Input Voltage | 12~15 Volt AC 50Hz ±15%, 13~24 Volt DC |
| Power | 100 mA (typ.), 280 mA (max.) 7,2 VA (max.) |
| Operating Temperature | -10ºC ~ 45ºC |
| Humility (max.) | 85% RH |
| Physical Dimensions (PCB) | DIN 142mm (W) x 104mm (D) |
| Weight | 250g |
| Standard Accessories | Manual, Mounting kit, Euro terminal Blocks |
| Options
| | ABS BOX for PCB IP-54 |
|
|
|
|
